BCWYK - BROWN 30117
- MSDS: BCWYK
- Manufacturer: AMERON PROTECTIVE COATINGS
- Product Name: BROWN 30117
- National Stock Number: 8010-00-063-8968
Product Identification
Product ID:BROWN 30117
MSDS Date:01/01/1985
FSC:8010
NIIN:00-063-8968
MSDS Number: BCWYK
Responsible Party
BREA, CA 92622-1020
US
Emergency Phone: 714-529-1951
Info Phone: 714-529-1951
Cage: 0Y2E4
Contractor
Telephone: 714-529-1951
Cage: 0Y2E4
Ingredients
BUTANOL, N-BUTYL ALCOHOL, PROPYL CARBINOL, BUTYL ALCOHOL
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 7%
OSHA PEL 100 PPM
ACGIH TLV: C 152 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOBUTYL ACETATE
CAS: 110-19-0
RTECS: AI4025000
Fraction By Weight: 25%
OSHA PEL 150 PPM
ACGIH TLV: 713 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
BENZIN, NAPHTHA, MINERAL SPIRITS, PETROLEUM NAPHTHA
CAS: 8030-30-6
RTECS: DE3030000
Fraction By Weight: 15%
OSHA PEL 100 PPM
ACGIH TLV: 300 PPM
CELLOSOLVE ACETATE (ETHYLENE GLYCOL ETHYL ETHER ACETATE),
CAS: 111-15-9
RTECS: KK8225000
Fraction By Weight: 5%
OSHA PEL 100 PPM
ACGIH TLV: 5 PPM SKIN
ISOBUTANOL, 2-METHYL-1-PROPANOL, ISOBUTYL ALCOHOL
CAS: 78-83-1
RTECS: NP9625000
Fraction By Weight: 5%
OSHA PEL 300 MG/CUM
ACGIH TLV: 152 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: ANESTHETIC. MAY CAUSE
IRRITATION OF RESPIRATORY TRACT. NERVOUS SYSTEM DEPRESSION.
SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, DIZZINESS
First Aid
First Aid:SKIN/EYES: FLUSH W/PLENTY OF WATER. INHALATION: REMOVE TO
FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:30F
Lower Limits:0.9
Extinguishing Media:SMALL: CO2/DRY CHEMICAL
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE DUE TO PRESSURE BUILD UP.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION; HOT SURFACES,
ELECTRICAL, STATIC/FRICTIONAL SPARKS. AVOID BREATHING VAPORS.
REMOVE W/INERT ABSORBENT & NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:DON'T STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED FOR STORAGE OF NFPA CLASS ONE
FLAMMABLE/COMBUSTIBLE.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED PAINT RESPIRATORS/AIR
SUPPLIED RESPIRATORS.
Ventilation:PROVIDE GENERAL DILUTION/LOCAL EXHAUST AS NECESSARY.
Supplemental Safety and Health
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:175-329F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:72.7
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FIRES, HEAT, HOT SURFACES
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL, STATE & FEDERAL
REGULATIONS. DON'T INCINERATE CLOSED CONTAINER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.